The landing gear are on, a very trying, mind boggling step. The first thing I did was put a
new X-Acto blade in my knife, the parts are very thin and fragile. I then did a lot of dry
fitting and looking at pictures of landing gear on walk around sites on the web. Also the
parts aren't exactly the size they should be, the long retraction strut I had to cut about
1/2 mm off it's length to get it to fit. I also had to fiddle with the piece that has the axle
for the wheel, it wanted to "toe in" so I had to adjust it until it looked fairly square at
about 90 degrees with the center line of the fuselage. Now to mask and paint the white
then the dark gull gray, still debating whether or not to add the nose wheel now or wait.---John