It's time......Nichimo 1/20 Aero Subaru

Show us what's on the bench

It's time......Nichimo 1/20 Aero Subaru

Postby Cap'n Wannabe » Tue Jun 13, 2017 11:07 pm

The Marui 1/36 kit has....well, not defeated me, but frustrated me enough for the moment. But I have a bee in my bonnet about getting one built, so it's up to the next scale. I have two of these kits - one that's been started (by somebody else, I hasten to add..) and one that's near enough mint in the box, and I'll be tackling the latter. The reason for this is that I want to do it from start to finish, and it'll need a few mods along the way.
The aircraft I'm modelling is VH-FJA. It's the last of the pre-production prototypes, and owned by a gent who keeps it at Riddel airfield, about 40 minutes drive from me. I was privileged the other weekend to go and see it, as well as another flying example, VH-FJY, and another in pieces, VH-FJX.
The differences between the pre-production and the production aircraft (and the mods I'll need to make) are as follows:

Fixed-pitch prop - I'll be looking at casting one from my Cessna 172 kit. Not sure about changing the spinner yet..
Lack of forward undercarriage fairings - these will simply be removed from the underside of the wings, and any holes filled in.
Narrower undercarriage fairings - not quite sure how I'll tackle these yet..
Different control yokes - the ones in the kit are kind of an open "u" shape, whereas on the aircraft they're closed. Not sure how to tackle these either, but I'll think of something..(I hope)
Different throttle setup - I'll need to check this out on the real aircraft again (unless I managed to take a photo last time), but I've got a feeling it's similar to a Cessna
Different elevator mass balance - on the pre-production aircraft, the mass balance extends to about half-way along the stabiliser whereas on the production aircraft it's full span.
Decals - gonna have to make and print my own....well, get my own printed!

I've got a feeling there may be a few more, but these are the main ones.

I'll also need to look again at the interior, specifically the seats and harnesses. The seats of the real deal have covers over them, and the harnesses appear to be 4-point.....nothing like what's in the kit!

Wish me luck, gents....I'm gonna need it!
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1381
Joined: Mon Apr 14, 2014 6:00 pm
Location: Craigieburn, Victoria

Re: It's time......Nichimo 1/20 Aero Subaru

Postby tor lives » Wed Jun 14, 2017 10:27 pm

Sounds like a very cool project, (and the first entry for next year's Civil category :D ).
A nice big 1:20 kit will offer lots of potential for detailing, and have real visual presence on the competition table. Bring it on!!!
TOR
tor lives
 
Posts: 4277
Joined: Mon Apr 14, 2014 11:01 am

Re: It's time......Nichimo 1/20 Aero Subaru

Postby Ansett A330 » Wed Jun 14, 2017 11:34 pm

Theme Music for your build :

https://www.youtube.com/watch?v=s-c8X52Qg4o

Good (or better) Luck (in 1:20 than in 1:36) !
Ansett A330
 
Posts: 1206
Joined: Sat Jun 04, 2016 2:14 pm
Location: Bacon Lettuce Tomato

Re: It's time......Nichimo 1/20 Aero Subaru

Postby Cap'n Wannabe » Thu Jun 15, 2017 4:54 pm

Well I tidied my bench up a bit sooner than I thought, dragged the kit out of the stash (although I still have to find somewhere to put it..) and slooooowly fondled the contents while mopping up puddles of drool....
Then I decided where I was going to start. It was always going to be the engine - that thing is a kit in itself, with individual cooling fins and such, and two different ways to build it depending on whether or not you're going to use the electric motor. I'm not going to....not on this build. Maybe my next one....but maybe not.
So I've removed all the engine parts from the box, save for the heater hoses. They're simply a tightly coiled spring and I don't want to risk losing them.

The first thing I noticed was how well the kit was packed. Everything was either colour coded, labelled, or that bloody obvious that you knew what it was.
Image
Image
Image
Image

Now the thing is, the cooling fins are metal, and shiny metal at that. The only engine that I know of with shiny metal cooling fins is the Jabiru engine - they use CNC machining to get their cylinder heads rather than casting. Anybody who knows casting will tell you that the finished product generally has rough surface (unless it's been highly polished). So I've got two things to do. Firstly, I've got to visit Riddel airfield again to photograph the engine in VH-FJA, then I have to reproduce the colours and surface texture in 1/20 scale. I've seen cylinder heads that are natural finish and painted, clean and filthy. So until I've seen *the* engine up close and personal, I can't start putting the heads together. My guess is that it'll be filthy, though!
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1381
Joined: Mon Apr 14, 2014 6:00 pm
Location: Craigieburn, Victoria

Re: It's time......Nichimo 1/20 Aero Subaru

Postby Cap'n Wannabe » Thu Jun 15, 2017 7:02 pm

So....the first tentative steps are taken. Glued the crankcase together with the prop shaft captured inside. And I managed to get glue on the bloody crankshaft...
Image
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1381
Joined: Mon Apr 14, 2014 6:00 pm
Location: Craigieburn, Victoria

Re: It's time......Nichimo 1/20 Aero Subaru

Postby Adam the Akrodude » Thu Jun 15, 2017 8:32 pm

How cool is this!

You do realise you will have major bragging rights over Capt Eric! I can see it now - you parading like the prize peacock at Expo 2018 chanting "1/32 is for kids!" within ear shot of Eric! :lol:

Shit is gonna get real at Expo 2018!
Adam the Akrodude
 
Posts: 2819
Joined: Mon Apr 14, 2014 1:02 pm
Location: 100,124,672,897 Bifrost Rd, Valhalla, Asgard

Re: It's time......Nichimo 1/20 Aero Subaru

Postby Cap'n Wannabe » Thu Jun 15, 2017 8:53 pm

Depending how this one goes, I might have two of 'em for Expo next year...
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1381
Joined: Mon Apr 14, 2014 6:00 pm
Location: Craigieburn, Victoria

Re: It's time......Nichimo 1/20 Aero Subaru

Postby tor lives » Thu Jun 15, 2017 10:47 pm

Cap'n Wannabe wrote:I might have two of 'em for Expo next year...


Ahhhh the pure optimism and energetic enthusiasm of the "week following Model Expo" after-glow.....happens to us all :D
TOR
tor lives
 
Posts: 4277
Joined: Mon Apr 14, 2014 11:01 am

Re: It's time......Nichimo 1/20 Aero Subaru

Postby Ansett A330 » Thu Jun 15, 2017 10:52 pm

tor lives wrote:Ahhhh the pure optimism and energetic enthusiasm of the "week following Model Expo" after-glow.....happens to us all :D
TOR


Ah is that the way it goes! In that case put me down for a scratchbuilt 1:32 Belfast ... No make that 1:24 so I can put an Airfix 1:24 Typhoon inside as the cargo.
Ansett A330
 
Posts: 1206
Joined: Sat Jun 04, 2016 2:14 pm
Location: Bacon Lettuce Tomato

Re: It's time......Nichimo 1/20 Aero Subaru

Postby Cap'n Wannabe » Thu Jun 15, 2017 11:06 pm

So in between doing other stuff tonight, I've finished the main part of the crankcase. I must say the parts fit ok, but not great. Not having any locating guides is a tad painful as well. Still, I reckon it looks ok. Apart from a touch of sanding at the seams, it's ready to paint.....once I figure out the colour. I've seen them dark(ish) grey, and I've seen them raw aluminium. Off to Riddel to take some photos of the real deal on Tuesday, hopefully!
Image
Image
Image

7 parts down, 343 to go :)
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1381
Joined: Mon Apr 14, 2014 6:00 pm
Location: Craigieburn, Victoria

Next

Return to Member's Works in Progress

Who is online

Users browsing this forum: No registered users and 16 guests