So here are some current work pictures
New APU housing fitted
![Image](https://farm5.staticflickr.com/4476/24305581588_b5d8106006_b.jpg)
You can see the layers of paint/primer sanded back
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
But I will have to add some putty to fair it in.
More paint removed to add the Satcom antenna fairing
![Image](https://farm5.staticflickr.com/4452/37448073584_464f93b814_b.jpg)
Fairing fitted. It is a bit squarish so I have knocked the edges down a little to round it off.
![Image](https://farm5.staticflickr.com/4520/38102651106_b26af2496b_b.jpg)
Vertical stab attatched
![Image](https://farm5.staticflickr.com/4472/24305580858_063abea191_b.jpg)
Some attention to the wing tips to removed them in prep for fitting winglets
![Image](https://farm5.staticflickr.com/4568/24305580678_c41d3934a9_b.jpg)
![Image](https://farm5.staticflickr.com/4481/38102650816_a8c4e4c982_b.jpg)
And finally, engines are tacked on so I can figure out how much I need to extend the struts (have been told it is 6mm, so that is where I will start). Also added a friend to show size.
![Image](https://farm5.staticflickr.com/4462/37448072664_53d700348f_b.jpg)