Cessna 180 open engine bay

A membership discussion forum for all things modelling.

Cessna 180 open engine bay

Postby tor lives » Sat Jul 09, 2016 4:49 pm

Hi guys,
I am just pottering with a little, old Monogram 1:41 Cessna 180, (waiting for the decal sheets to arrive for my 707 Tankers), and, despite the age of the kit, it has quiet a nicely-detailed little engine. I wouldn't mind showing it off by having the engine bay open, but I can't seem to find any descent reference shots of a Cessna 180 open engine bay. Could any one point me in the right direction, or at least advise on colours etc.
Thanks in advance.
TOR
tor lives
 
Posts: 4280
Joined: Mon Apr 14, 2014 11:01 am

Re: Cessna 180 open engine bay

Postby Cap'n Wannabe » Sat Jul 09, 2016 5:52 pm

The firewall would be either aluminium, light grey, or interior green. Likewise, the inside surface of the cowl would be the same. Engine block would generally be a darker grey, with the cylinders black (drybrushed with silver..) and the heads a blue/grey. Most of the other stuff would be black as well. HTH
I know these aren't all Cessna 180s, but you get the idea..
https://www.google.com.au/search?hl=en& ... wvn_BFM%3A
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1382
Joined: Mon Apr 14, 2014 6:00 pm
Location: Craigieburn, Victoria

Re: Cessna 180 open engine bay

Postby tor lives » Sat Jul 09, 2016 6:16 pm

That's very helpful......thanks Damo.
I think Andrew did an Aussie Army version of this kit. I am just trolling through his AMI images now to see if there is an engine bay shot.
TOR
tor lives
 
Posts: 4280
Joined: Mon Apr 14, 2014 11:01 am

Re: Cessna 180 open engine bay

Postby tor lives » Sat Jul 09, 2016 8:39 pm

tor lives
 
Posts: 4280
Joined: Mon Apr 14, 2014 11:01 am

Re: Cessna 180 open engine bay

Postby Adam the Akrodude » Sun Jul 10, 2016 11:59 am

It's a Continental O-470 (470 cu. inch) - decent sized engine. Google is your friend. Note cylinder end caps can be different colours - all depends what shop may have refurb'd the engine I guess. I'd paint it in that "vomity" silver colour and use a sludge wash to bring out detail. Mix a tiny bit of Khaki with silver for the colour - oils like raw umber & panes grey for the sludge mix (with turps).

Image

Image

Image

Image

Personally not a fan of Continentals.
Adam the Akrodude
 
Posts: 2819
Joined: Mon Apr 14, 2014 1:02 pm
Location: 100,124,672,897 Bifrost Rd, Valhalla, Asgard

Re: Cessna 180 open engine bay

Postby tor lives » Sun Jul 10, 2016 12:26 pm

That is awesomely Sierra Hotel Adam!!! and exactly the sort of thing I was looking for.
When doing a pre-flight or inspection.....does the engine cowl just open and somehow pop up, or does the whole cowl have to come off??
TOR
tor lives
 
Posts: 4280
Joined: Mon Apr 14, 2014 11:01 am

Re: Cessna 180 open engine bay

Postby hrtpaul » Sun Jul 10, 2016 2:01 pm

'Cylinder end caps' = rocker covers 8-) 8-) 8-) 8-) 8-)
Head A/CAM Phantom Phanatic, Shit Stirrer and Karma Bus Driver toot fkn toot :twisted:
hrtpaul
 
Posts: 4165
Joined: Sat Apr 12, 2014 10:44 am
Location: Like I'm gonna tell you lot

Re: Cessna 180 open engine bay

Postby hrtpaul » Sun Jul 10, 2016 2:03 pm

Cowl flaps would be cable operated and no the whole cowl doesn't come off for a preflight. Only for a 100 hourly would it come off. Besides you couldn't trust pilots to put it back on properly :lol: :lol: :lol: :lol: :lol: :lol: :lol:
Head A/CAM Phantom Phanatic, Shit Stirrer and Karma Bus Driver toot fkn toot :twisted:
hrtpaul
 
Posts: 4165
Joined: Sat Apr 12, 2014 10:44 am
Location: Like I'm gonna tell you lot

Re: Cessna 180 open engine bay

Postby Cap'n Wannabe » Sun Jul 10, 2016 3:33 pm

Probably only take the cowl off when changing the oil. We're allowed to do that, you know, Paul! :lol: :lol:
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1382
Joined: Mon Apr 14, 2014 6:00 pm
Location: Craigieburn, Victoria

Re: Cessna 180 open engine bay

Postby hrtpaul » Sun Jul 10, 2016 4:00 pm

Cap'n Wannabe wrote:Probably only take the cowl off when changing the oil. We're allowed to do that, you know, Paul! :lol: :lol:

I wouldn't think so as the sump plug is usually lockwired and you ain't allowed to lockwire 8-) 8-) 8-) 8-) 8-) 8-) 8-)
Head A/CAM Phantom Phanatic, Shit Stirrer and Karma Bus Driver toot fkn toot :twisted:
hrtpaul
 
Posts: 4165
Joined: Sat Apr 12, 2014 10:44 am
Location: Like I'm gonna tell you lot

Next

Return to Model Talk

Who is online

Users browsing this forum: No registered users and 4 guests