Paul's favourite.....a 1/72 Piper Aztec!

Show us what's on the bench

Re: Paul's favourite.....a 1/72 Piper Aztec!

Postby Uros » Thu Sep 14, 2017 1:31 am

Looking good!
Cheers!
Uros
User avatar
Uros
 
Posts: 448
Joined: Mon Aug 14, 2017 6:25 pm
Location: Slovenia

Re: Paul's favourite.....a 1/72 Piper Aztec!

Postby Cap'n Wannabe » Mon Sep 18, 2017 11:36 am

Just to give you an idea of what I'm up against...
Image
Image

And here you can see the sink marks a bit better....I've started sanding the RH side windows. The LH side is done for now - I sanded the marks off the inside, then separated the windows into individual pieces. This will allow me to position them proud of the fuselage, then sand them flush.

Image
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1381
Joined: Mon Apr 14, 2014 6:00 pm
Location: Craigieburn, Victoria

Re: Paul's favourite.....a 1/72 Piper Aztec!

Postby F-27pax » Wed Sep 20, 2017 11:29 pm

I've got one of these kits and I'm admiring your work and know what you're up against. It will take me a while to get over making the Aurora Jet Commander so I probably won't work up the courage to have a go at this one for a while.
Leigh
F-27pax
 
Posts: 973
Joined: Fri Apr 18, 2014 11:40 pm

Re: Paul's favourite.....a 1/72 Piper Aztec!

Postby Cap'n Wannabe » Thu Sep 21, 2017 7:04 am

There's a few minor issues that I've found so far, the worst probably being the windows. The nacelles didn't *quite* want to line up - nothing a touch of sanding won't fix - the wing roots are going to need some work, and there's a gap in the nose wheel well. Other than that (so far) it's not too bad a kit.
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1381
Joined: Mon Apr 14, 2014 6:00 pm
Location: Craigieburn, Victoria

Re: Paul's favourite.....a 1/72 Piper Aztec!

Postby Cap'n Wannabe » Thu Sep 21, 2017 9:38 am

Almost done with the LH windows....they're still a touch proud of the fuselage, and need more cleanup, but they're looking good.....at least to my eye ;)
Image
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1381
Joined: Mon Apr 14, 2014 6:00 pm
Location: Craigieburn, Victoria

Re: Paul's favourite.....a 1/72 Piper Aztec!

Postby RayS » Thu Sep 21, 2017 9:56 am

COming along slowly, nice to see the care you are taking with the window fit Damo.

I think I have a couple of these hiding in the stash. Should try and find them :D
Ray

Image
User avatar
RayS
 
Posts: 2194
Joined: Thu Apr 17, 2014 10:24 am
Location: RAdelaide!... YPAD

Re: Paul's favourite.....a 1/72 Piper Aztec!

Postby Cap'n Wannabe » Mon Oct 02, 2017 5:39 pm

LH windows done, RH on the way. I had a little difficulty positioning the RH windows because I sanded a little too much around the edges, so they fell through the openings. Yes, I dropped all 3 windows at one time or another....but the carpet monster must've been on holiday..
Image
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1381
Joined: Mon Apr 14, 2014 6:00 pm
Location: Craigieburn, Victoria

Re: Paul's favourite.....a 1/72 Piper Aztec!

Postby Ansett A330 » Mon Oct 02, 2017 10:02 pm

Cap'n Wannabe wrote:....but the carpet monster must've been on holiday..


Yes it would have been on holiday if it was a Queensland Carpet Monster as it was a long Weekend this Weekend.

Nice work. Of all the Kits I've got I don't think I've got one of these but paying close attention in case I have and live long enough to make it.
Ansett A330
 
Posts: 1206
Joined: Sat Jun 04, 2016 2:14 pm
Location: Bacon Lettuce Tomato

Previous

Return to Member's Works in Progress

Who is online

Users browsing this forum: No registered users and 5 guests