ZK-CCG take 2

Show us what's on the bench

Re: ZK-CCG take 2

Postby VH-WAL » Wed Apr 12, 2017 7:06 pm

Bummer.. I avoided that on the Trojan by cheating..I printed red decal stripes..no runs, dead straight!
VH-WAL
 
Posts: 1068
Joined: Mon Apr 14, 2014 9:11 pm

Re: ZK-CCG take 2

Postby Adam the Akrodude » Thu Apr 13, 2017 12:52 pm

EEEEW! Bummer man.
Adam the Akrodude
 
Posts: 2819
Joined: Mon Apr 14, 2014 1:02 pm
Location: 100,124,672,897 Bifrost Rd, Valhalla, Asgard

Re: ZK-CCG take 2

Postby Cap'n Wannabe » Sat Apr 15, 2017 12:57 pm

So I decided to try something before taking the drastic step of stripping the paint off and starting over....
I masked the red *very* carefully, and sprayed some very thin off-white at very low pressure - much betterer! (although still not quite perfect...but what are ya gonna do!)
Image
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1381
Joined: Mon Apr 14, 2014 6:00 pm
Location: Craigieburn, Victoria

Re: ZK-CCG take 2

Postby Cap'n Wannabe » Sat Apr 15, 2017 7:28 pm

Awwwww dammit!
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1381
Joined: Mon Apr 14, 2014 6:00 pm
Location: Craigieburn, Victoria

Re: ZK-CCG take 2

Postby oz rb fan » Sun Apr 16, 2017 9:31 am

what now?
oz rb fan
 
Posts: 1199
Joined: Mon Apr 14, 2014 7:28 pm

Re: ZK-CCG take 2

Postby DesTROYer » Sun Apr 16, 2017 9:51 am

I damn well hate that. How can such a small plane have such deep panel lines?
Bad luck mate. I'm sure you'll get it right.
User avatar
DesTROYer
 
Posts: 778
Joined: Tue Jun 24, 2014 9:49 pm
Location: 37.8136° S, 144.9631° E

Re: ZK-CCG take 2

Postby Cap'n Wannabe » Sun Apr 16, 2017 10:36 am

The first repair of the stripes was a bit of an experiment, but I'd managed to get the paint just the right consistency by eyeballing it....of course, I only mixed enough paint for one set. So when I did the others, it was way too thin, and despite my careful masking, it managed to get under the tape and also pooled in spots. So into the laundry (after carefully masking the cockpit with blu-tac....it's the only way to seal everything off), on with the BBQ cleaner, and off with the paint. Which is kind of a blessing in disguise, I suppose - the original paint job had a few orange-peely spots that I wasn't going to worry too much about, but now I have a chance to do it better. Or worse..
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1381
Joined: Mon Apr 14, 2014 6:00 pm
Location: Craigieburn, Victoria

Re: ZK-CCG take 2

Postby tor lives » Sun Apr 16, 2017 6:52 pm

Keep with it mate.....what doesn't kill us in this hobby will only make us stronger. No doubt it will turn out to be a stunning model when completed, then all this frustration will be an ancient memory.
TOR
tor lives
 
Posts: 4277
Joined: Mon Apr 14, 2014 11:01 am

Re: ZK-CCG take 2

Postby Cap'n Wannabe » Mon Apr 17, 2017 3:35 pm

...and the hits just keep on coming. Major undercarriage collapse while undergoing a respray. Thankfully nobody was hurt, but the ATSB will send their tea-lady out to investigate, and no doubt she'll somehow blame the pilot, who was asleep in bed at the time.
Image
Pretending to do it TAC style with the big boys since 1987
Also, we don't need no steenkin' VLATs!
Cap'n Wannabe
 
Posts: 1381
Joined: Mon Apr 14, 2014 6:00 pm
Location: Craigieburn, Victoria

Re: ZK-CCG take 2

Postby Adam the Akrodude » Mon Apr 17, 2017 4:25 pm

I know I really should not comment before the ATSB tea lady does her thing, but I'm blaming those "Made in Chyna" toothpicks and the shoddy way they were used. Move along folks, this is indeed another case of pilot error! :lol:
Adam the Akrodude
 
Posts: 2819
Joined: Mon Apr 14, 2014 1:02 pm
Location: 100,124,672,897 Bifrost Rd, Valhalla, Asgard

PreviousNext

Return to Member's Works in Progress

Who is online

Users browsing this forum: No registered users and 11 guests