This is how it looked before the move.
Radome assembled and test fitted
And then....
..to get it to fit into a box
Now the reassembly has started
SOme antennas need to be remade as they did not survive the trip over.
E-3A (Heller) 1/72 USAF
18 posts
• Page 1 of 2 • 1, 2
E-3A (Heller) 1/72 USAF
by RayS » Mon Jun 20, 2022 10:11 pm
This is a resurrected build as it was 'deconstructed' for my move to South Australia
This is how it looked before the move.
Radome assembled and test fitted
And then....
..to get it to fit into a box
Now the reassembly has started
SOme antennas need to be remade as they did not survive the trip over.
This is how it looked before the move.
Radome assembled and test fitted
And then....
..to get it to fit into a box
Now the reassembly has started
SOme antennas need to be remade as they did not survive the trip over.
Last edited by RayS on Fri Nov 25, 2022 10:32 am, edited 1 time in total.
Ray
-
RayS - Posts: 2198
- Joined: Thu Apr 17, 2014 10:24 am
- Location: RAdelaide!... YPAD
Re: E-3A (Heller)
by hrtpaul » Mon Jun 20, 2022 10:15 pm
That will look great when done. I love your antenna work on all your builds. Really adds to them I reckon. Great catching up at expo to mate 
Head A/CAM Phantom Phanatic, Shit Stirrer and Karma Bus Driver toot fkn toot 
- hrtpaul
- Posts: 4165
- Joined: Sat Apr 12, 2014 10:44 am
- Location: Like I'm gonna tell you lot
Re: E-3A (Heller)
by RayS » Mon Jun 20, 2022 10:22 pm
Cheers Paul, great to see you.
Since I got obliterated by the competition with everything I entered I might take a bit more care finishing this one off fro next year.
Since I got obliterated by the competition with everything I entered I might take a bit more care finishing this one off fro next year.
Ray
-
RayS - Posts: 2198
- Joined: Thu Apr 17, 2014 10:24 am
- Location: RAdelaide!... YPAD
Re: E-3A (Heller)
by hrtpaul » Tue Jun 21, 2022 3:17 pm
RayS wrote:Since I got obliterated by the competition with everything I entered I might take a bit more care finishing this one off fro next year.
As long as you have fun then that's all that matters. Trophies are a bonus
Head A/CAM Phantom Phanatic, Shit Stirrer and Karma Bus Driver toot fkn toot
- hrtpaul
- Posts: 4165
- Joined: Sat Apr 12, 2014 10:44 am
- Location: Like I'm gonna tell you lot
Re: E-3A (Heller)
by tor lives » Tue Jun 21, 2022 3:49 pm
The big, ol E-3 is looking good Ray.
Don't worry about trophies mate....at least you had some models on the tables (which is much more than what I can say), and, form what I could see, they were bloody nice.
PS: It was good catching up with ya.
TOR
Don't worry about trophies mate....at least you had some models on the tables (which is much more than what I can say), and, form what I could see, they were bloody nice.
PS: It was good catching up with ya.
TOR
- tor lives
- Posts: 4277
- Joined: Mon Apr 14, 2014 11:01 am
Re: E-3A (Heller)
by RayS » Tue Jun 21, 2022 6:04 pm
Cheers guys, you are right, I am not worried. Jut there to make up numbers 
The other wing back on with persuasion
Once all that Revell Contacta sets it will be out with the putty to fill the resultant cracks and seams
The other wing back on with persuasion
Once all that Revell Contacta sets it will be out with the putty to fill the resultant cracks and seams
Ray
-
RayS - Posts: 2198
- Joined: Thu Apr 17, 2014 10:24 am
- Location: RAdelaide!... YPAD
Re: E-3A (Heller)
by RayS » Sat Jun 25, 2022 11:25 am
After some sanding it was once again primed
In blue! I have lots of spare paint in odd colours so I thought I would use these instead of the usual primers. Some more putty has gone on.
It is close to reinstalling the blade antennas that were knocked off and wing tip HF antennas
In blue! I have lots of spare paint in odd colours so I thought I would use these instead of the usual primers. Some more putty has gone on.
It is close to reinstalling the blade antennas that were knocked off and wing tip HF antennas
Ray
-
RayS - Posts: 2198
- Joined: Thu Apr 17, 2014 10:24 am
- Location: RAdelaide!... YPAD
Re: E-3A (Heller)
by RayS » Fri Aug 05, 2022 5:19 pm
Time to spend some more time on the E-3.
Primed in a more appropriate colour, and broken/missing antennas refitted.
Also checked the fit of the rotodome and supports. Had some issues with the support breaking, but it s now reglued and setting again.
Primed in a more appropriate colour, and broken/missing antennas refitted.
Also checked the fit of the rotodome and supports. Had some issues with the support breaking, but it s now reglued and setting again.
Ray
-
RayS - Posts: 2198
- Joined: Thu Apr 17, 2014 10:24 am
- Location: RAdelaide!... YPAD
Re: E-3A (Heller)
by hrtpaul » Sat Aug 06, 2022 12:52 pm
That's looking great Ray
Head A/CAM Phantom Phanatic, Shit Stirrer and Karma Bus Driver toot fkn toot
- hrtpaul
- Posts: 4165
- Joined: Sat Apr 12, 2014 10:44 am
- Location: Like I'm gonna tell you lot
Re: E-3A (Heller)
by tor lives » Sat Aug 06, 2022 2:59 pm
That's looking the business Ray!!!
I never cease to be amazed just how beautiful, majestic, and perfectly in proportion the 707 is.
TOR
I never cease to be amazed just how beautiful, majestic, and perfectly in proportion the 707 is.
TOR
- tor lives
- Posts: 4277
- Joined: Mon Apr 14, 2014 11:01 am
18 posts
• Page 1 of 2 • 1, 2
Return to Group Build: Boeing 707
Who is online
Users browsing this forum: No registered users and 2 guests