Page 1 of 1

"Future" Re-branded (again!)

PostPosted: Sat Feb 03, 2018 2:07 am
by SpaceRanger
First it was "Future." Then it was "Pledge with Future Shine." Then it was "Pledge Floor Care Multi-Surface Finish." Now it's "Pledge revive it":

Image

Thanks to Paul Boyer for originally pointing this out on Hyperscale.

Note: the brand names listed above apply only in the US. The new name will probably be different depending on what part of the world you live in.

Re: "Future" Re-branded (again!)

PostPosted: Sat Feb 03, 2018 8:39 am
by RayS
Thanks Michael, it is not available here in Australia.

But good to know next time I am shopping in the US! :D

Re: "Future" Re-branded (again!)

PostPosted: Sat Feb 03, 2018 1:22 pm
by Adam the Akrodude
Personally, I've read about way too many people having issues with Future - I can't see the advantage of using it for anything other than making canopies nice and sparkly. I've never had issues with Gunze gloss or Tamiya gloss, so I just don't get the attraction with Future? I've ordered some AK product for canopies and will post results on this product once tested.

I tried a Humbrol acrylic Gloss - smelt the same as Future. It was awful - not even worth using on canopies either. Into the bin it went.

Re: "Future" Re-branded (again!)

PostPosted: Wed Feb 07, 2018 12:03 am
by SpaceRanger
Adam the Akrodude wrote:Personally, I've read about way too many people having issues with Future - I can't see the advantage of using it for anything other than making canopies nice and sparkly. I've never had issues with Gunze gloss or Tamiya gloss, so I just don't get the attraction with Future? I've ordered some AK product for canopies and will post results on this product once tested.

I tried a Humbrol acrylic Gloss - smelt the same as Future. It was awful - not even worth using on canopies either. Into the bin it went.


All "acrylics" are not equal. But I don't use "Future" for anything but coating canopies myself.

Re: "Future" Re-branded (again!)

PostPosted: Sat Feb 10, 2018 10:03 am
by Adam the Akrodude
All "acrylics" are not equal. But I don't use "Future" for anything but coating canopies myself.[/quote]

Totally agreed on both points sir! My bottle of AK "Glass Coat Gauzy Agent" has arrived. It is supposed to be for coating canopies only - or any other "glass/clear" parts. It has a milky look about it which is interesting - obviously goes clear when dry! ;) I'll do a review of this product shortly.

Sparkly canopies is a subject close to my heart - as someone who over the years has put in a fair share of elbow grease using Plexus to get a nice sparkly and clear canopy on 1:1 scale - only to be ruined in flight by a leaking prop seal - AAARRRGGGHHHH (but that's another story!). 8-)

Re: "Future" Re-branded (again!)

PostPosted: Sat Feb 10, 2018 4:10 pm
by Graeme H
I am still using an Australian product called Paast which is no longer available, should last me for the everything I will use it for.