Just to give you an idea of what I'm up against...
And here you can see the sink marks a bit better....I've started sanding the RH side windows. The LH side is done for now - I sanded the marks off the inside, then separated the windows into individual pieces. This will allow me to position them proud of the fuselage, then sand them flush.
Pretending to do it TAC style with the big boys since 1987 Also, we don't need no steenkin' VLATs!
I've got one of these kits and I'm admiring your work and know what you're up against. It will take me a while to get over making the Aurora Jet Commander so I probably won't work up the courage to have a go at this one for a while. Leigh
There's a few minor issues that I've found so far, the worst probably being the windows. The nacelles didn't *quite* want to line up - nothing a touch of sanding won't fix - the wing roots are going to need some work, and there's a gap in the nose wheel well. Other than that (so far) it's not too bad a kit.
Pretending to do it TAC style with the big boys since 1987 Also, we don't need no steenkin' VLATs!
LH windows done, RH on the way. I had a little difficulty positioning the RH windows because I sanded a little too much around the edges, so they fell through the openings. Yes, I dropped all 3 windows at one time or another....but the carpet monster must've been on holiday..
Pretending to do it TAC style with the big boys since 1987 Also, we don't need no steenkin' VLATs!